Adobe Certification

　
　
Exam : HP HP0-490
Title : HP BladeSystem p-Class Solutions I


1. You are diagnosing a problem with an HP BladeSystem infrastructure. The installed blade servers or interconnect switches do not power on but the power supply AC power LEDs are on. None of the fault LEDs are illuminated. You have ensured that the power enclosure is properly cabled and connected to the power outlets. What is the possible cause of this problem?
A. The power bus bar circuit breakers are in the off position.
B. The power enclosure circuit breakers are in the off position.
C. The power zones are incorrectly set.
D. The sides A and B of the power enclosure do not have an equal number of power supplies.
Answer: A

2. You insert two ProLiant BL35p blade servers into a blade server sleeve which you then connect to the Diagnostic Station. When you attempt to power on the blade servers only one turns on. Why?
A. You used a single power supply in the Diagnostic Station instead of two.
B. Only one ProLiant BL35p blade server can be powered at one time by the Diagnostic Station.
C. The ProLiant BL35p blade servers are not supported with the Diagnostic Station.
D. You only connected one power cable from the Diagnostic Station to the blade server sleeve.
Answer: B

3. Click the Exhibit button.
Which label corresponds to the default PXE NIC of the connected blade server?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B

4. What is the function of the ProLiant BL p-Class Diagnostic Station?
A. scans all major hardware components of a ProLiant BL p-Class blade server for failures
B. powers on and enables communication with a single ProLiant BL p-Class blade server or an interconnect switch outside the rack environment
C. diagnoses communication problems between the ProLiant BL p-Class blade servers, the supported interconnect switches, the blade server enclosure, and the power enclosure
D. tests and diagnoses the functionality of either a ProLiant BL p-Class blade server or an interconnect switch
Answer: B

5. You are diagnosing a problem with an HP BladeSystem infrastructure. Some of the blade servers do not power on and the hot-plug power supply fault LED is flashing amber. What is the cause of this problem?
A. The current power consumption exceeds the available power capacity.
B. The management modules are cabled incorrectly.
C. The power enclosure management module has failed.
D. The power supply backplane has failed.
Answer: A

hotexam has assembled to take you through 120 Q&As to your HP0-490 Exam preparation. In the HP0-490 exam resources, you will cover every field and category in HP0-490 helping to ready you for your successful Juniper Certification.

Quality and Value for the HP0-490 Exam

hotexam Practice Exams for HP HP0-490 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your HP0-490 Exam

If you prepare for the exam using our hotexam testing engine, we guarantee your success in the first attempt. If you do not pass the Certification I HP0-490 exam (HP BladeSystem p-Class Solutions I) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

HP HP0-490 Downloadable, Printable Exams (in PDF format)

Our Exam HP0-490 Preparation Material provides you everything you will need to take your HP0-490 Exam. The HP0-490 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

HP0-490 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs)

Our HP Certification I HP0-490 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the HP0-490 Exam:100% Guarantee to Pass Your Certification I exam and get your Certification I Certification.