PassLeader Share The New Version Microsoft 70-247 Exam Dumps (11-20)

Comments are closed

QUESTION 11
You have a System Center 2012 Virtual Machine Manager (VMIM) infrastructure that contains a server named Server1. Server1 hosts the VMM library. You add a server named Server2 to the network. You install the Windows Deployment Services (WDS) server role on Server2. You have the Install.wim file from the Windows Server 20008 R2 Service Pack 1 (SP1) installation media. You need to install Hyper-V hosts by using the bare-metal installation method. What should you do first?

A.    Convert Install.wim to a .vmc file.
B.    Convert Install.wim to a .vhd file.
C.    Add Install.wim to the VMM library.
D.    Add Install.wim to the Install Images Container.

Answer: B
Explanation:
For the bare metal deployment, you need an operating system and one of the first steps to take is to create a bootable VHD for that operating system. This is done by using the WIM2VHD tool to take the install.wim file from your Windows Server 2008 R2 SP1 installation media and convert it.

QUESTION 12
You have a System Center 2012 Virtual Machine Manager (VMM) infrastructure that contains 20 virtualization hosts. Each host contains 20 virtual machines. You need to configure the network fabric. The solution must prevent the virtual machines from connecting to a VLAN. What should you do from the Network Site properties?

A.    set the VLAN ID to 0.
B.    set the VLAN ID to 10.
C.    set the IP subnet to FD4A::/32.
D.    set the IP subnet to 192.168.1.0/20.

Answer: A
Explanation:
VLAN 0 means you want VLAN disabled. Use this setting when you don’t care about VLAN IDs.

QUESTION 13
You have a System Center 2012 Virtual Machine Manager (VMM) infrastructure that contains a virtualization host named Server2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1). Server2 has the Hyper-V server role installed. You plan to deploy a service named Service1 to Server2. Service1 has multiple load-balanced tiers. You need to recommend a technology that must be implemented on Server2 before you deploy Service1. What should you recommend?

A.    TCP offloading
B.    the Network Policy and Access Services (NPAS) server role
C.    the Multipath I/O (MPIO) feature
D.    MAC address spoofing

Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/hh335098.aspx
If you want to deploy the service to a Windows Server 2008 R2-based Hyper-V host (with or without Service Pack 1), you must also enable MAC address spoofing for NLB to work correctly. If you do not, service deployment will fail. However, you cannot use the Enable spoofing of MAC addresses check box in the virtual machine template or the associated hardware profile to configure this setting. Instead, you must use the VMM command shell to configure this setting after you create the template, or in the hardware profile that you use for the template.


PassLeader[30]

http://www.passleader.com/70-247.html

QUESTION 14
Your company has a private cloud that is managed by a System Center 2012 Virtual Machine Manager (VMM) infrastructure. The infrastructure contains a server named Server1 that has VMM installed. You plan to deploy the Hyper-V server role to a server named Server2. Server2 runs Windows Server 2008 R2. Server2 is member of a workgroup. You need to add Server2 to the VMM fabric. What should you do? (Each correct answer presents part of the solution. Choose three.)

A.    From the VMM Administrator Console, run the Add Resource Wizard, and then click Windows Server computers in a perimeter network.
B.    From the VMM 2012 installation media, install the VMM agent on Server2.
C.    From the VMM Administrator Console, run the Add Resource Wizard, and then click Windows Server computer in an untrusted Active Directory domain.
D.    Copy the SecurityFile.txt file from Server2 to Server1.
E.    From the Services console on Server1, start the SSDP Discovery service.
F.    Copy the ApplicationHost.config file from Server2 to Server1.

Answer: ABD

QUESTION 15
You have a System Center 2012 Virtual Machine Manager (VMM) infrastructure that contains five virtualization hosts. You add new storage to the network. You need to discover the storage from the VMM Administrator Console. What should you create first?

A.    a Hardware Profile
B.    a classification
C.    a Run As Account
D.    a Guest as Profile

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/gg610563

QUESTION 16
Your company has a private cloud that is managed by a server named Server1. Server1 has System Center 2012 Virtual Machine Manager (VMM) installed. You add a Hyper-V host named Server2 to the server fabric. Server2 is connected to a SAN named SAN1 by using Fiber Channel connections. You need to optimize access to the LUNs in SAN1 from Server2. What should you do first?

A.    Install the Multipath I/O (MPIO) feature on Server2.
B.    Configure Server2 to connect to SAN 1 by using an iSCSI channel.
C.    Install the Multipath I/O (MPIO) feature on Server1.
D.    Configure Server1 to connect to SAN 1 by using an iSCSI channel.

Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/gg610692.aspx
The Multipath I/O (MPIO) feature must be added on each host that will access the Fibre Channel or iSCSI storage array. You can add the MPIO feature through Server Manager. If the MPIO feature is already enabled before you add a host to VMM management, VMM will automatically enable MPIO for supported storage arrays by using the Microsoft provided Device Specific Module (DSM). If you already installed vendor-specific DSMs for supported storage arrays, and then add the host to VMM management, the vendor-specific MPIO settings will be used to communicate with those arrays.

QUESTION 17
You install System Center 2012 Virtual Machine Manager (VMM) on a server named Server1. You configure the VMM fabric for networking. You need to create an IP address pool. What should you create first?

A.    a Run As Account
B.    a Hardware Profile
C.    a logical network
D.    a VIP template

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/gg610590.aspx

QUESTION 18
Your network contains a server named Server1 that has System Center 2012 Virtual Machine Manager (VMM) installed. You have a host group named HG1. HG1 contains four virtualization hosts named Server2, Server 3, Server4, and Server5. You plan to provide users with the ability to deploy virtual machines by using the Self-Service Portal. The corporate management policy states that only the members of a group named Group1 can place virtual machines on Server2 and Server3 and only the members of a group named Group2 can place virtual machines on Server4 and Server5. You need to recommend a cloud configuration to meet the requirements of the management policy. What should you recommend?

A.    Create two clouds named Cloud1 and Cloud2. Configure placement rules for HG1.
B.    Create two host groups named HG1\Group1 and HG1\Group2. Create one cloud for each new host group. Move two servers to each host group.
C.    Create two clouds named Cloud1 and Cloud2. Configure the custom properties of each cloud.
D.    Create a host group named HG1\HG2. Create one cloud for HG1 and one cloud for HG2. Move two servers to HG2.

Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/bb740793

QUESTION 19
You configure the System Center 2012 Service Manager connector for System Center 2012 Virtual Machine Manager (VMM). You need to ensure that users can access the VMM data from the System Center Service Manager console. Which two tasks should you perform from the System Center Service Manager console? (Each correct answer presents part of the solution. Choose two. )

A.    Import the VMM management packs.
B.    Create a catalog group.
C.    Create a type projection.
D.    Import the VMM classes by using the CSV connector.
E.    Create views based on VMM classes.

Answer: AE

QUESTION 20
Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2. Server1 has System Center 2012 Virtual Machine Manager (VMM) installed. Server2 has System Center 2012 Operations Manager installed. You need to configure Operations Manager to monitor the VMM infrastructure. Which three management packs should you install on Server2? (Each correct answer presents part of the solution. Choose three.)

A.    the Internet Information Services 7 Monitoring Management Pack
B.    the Microsoft SQL Server Monitoring Management Pack
C.    the File Services Management Pack
D.    the Windows Server Hyper-V Management Pack
E.    the Monitoring Pack for Active Directory (AD)
F.    the Windows Server Operating System Management Pack
G.    Windows Server DNS 2003/2008/2008 R2 Monitoring Management Pack

Answer: ABF


PassLeader Share The New Version Microsoft 70-247 Exam Dumps

http://www.passleader.com/70-247.html

         

Comments are closed.